Produktai skirti prekės grąžinimo atostogų metu (17)

Description: Oleic acid is a monounsaturated fatty acid. It belongs to the group of omega-9 unsaturated fatty acids. It is oily, odorless, colorless liquid, lighter than water. It is insoluble in water, but soluble in organic solvents. Scope of application: Oil and gas, tool making, textile industries; analytical practice. Oleic acid and its esters are used as plasticizers for the production of paints and coatings. It is used in soap making, oleic acid and its salts are widely used as emulsifiers. It is also used as a stabilizer for magnetic fluids based on hydrocarbon carriers of ferromagnetic particles. Manufacturer: China and Russia Type of packaging: barrel 180 kg Freezing Point:15,7 С Acid value :181 Saponification number:190

Aqua Prof ® is a double layer hose with thread reinforcement. Black inner layer and yellow outer layer, grey marking line. Aqua Prof ® show no colorless, no kinks and no cracks while use any season. Made of thermoplastic elastomer (TPE), that is a better version of rubber, that provides large temperature range of use -50+70°C, outstanding elastic and deformation resistant qualities, resistance against UV rays up to 50 years. Packing method: the hose is winded up in a coil, fixed by a fastening tape and placed in shrink wrap. Product composition:Thermoplastic elastomer (TPE) Color :Yellow with a gray stripe Service life:Up to 20 years Operating temperature:-50+70°C (-58+158°F) Operating pressure:10 bar Product unit:Running meter Application mode:To water garden during any season. Can be connected to a hose sprayer. Can be winded on a hose reel Transportation :Pallets of coils Recycling :Allowed

Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs. Material:Composite made of solid-woven reinforced fiberglass Diameter:50-1200 mm length:200-600 mm Bolts, nuts:Steel, can be made of carbon fiber Weight:Much lighter than steel ones Operating pressure:Up To 20 MPa (200 Bar) Corrosion resistance:100% Chemical resistance:100% Application temperature:-60 *C to +180 *C (Celsius) Fire resistance:Yes Applicable to pipes made of material:Metal, plastic, stone Major repairs:Yes Service life:Not more than 30 years old Installation time:2-3 hours Repair kit:included

Photoluminescent tape in accordance with GOST FES-24 with the image of "Zebra" in a roll 50 mm wide (in running meters). Light yellow, cadmium-free, special film with a matte surface in accordance with TU 22.21.30-001-13006553-2020. The number of charge and discharge cycles of phosphors is not limited within 7 years. This tape is intended for decoration of escape routes with the FES system, as well as for decorative purposes. The tape is made of light-accumulating film, which charges in the light and glows independently in a dark room. Total thickness:0.35 mm Thickness without supporting plate:0.185 mm (Without back paper) Flammability group:Г2 (moderately flammable) Inflammability group:B2 (moderately inflammable) Smoke generation coefficient:Д2 (moderate smoke generation capacity) Toxicity index:T2 (moderate hazards) Flame propagation group:РП2 (weakly propagating) Oxygen index:24.5% Shape stability:max 0.3 mm shrinkage when pasting on steel Tensile break elongation:150% in the transverse and longitudinal direction Thermal stability:When applied to aluminum, -40°C to +100°C, unchanged Tensile strength:min 12 MPa in the transverse and longitudinal direction Adherence temperature:at least +5°C Shelf life :at least 5 years The service life:at least 7 years

Standart Prof COLOR® is a double layer hose with thread reinforcement are good for garden, agricultural and industrial watering. Black or white inner layer and different colors outer layer with marker line. Do not contain PVC and phthalates. Being environmentally friendly these hoses are safe for human’s health, allowed to contact with drinking liquids - drinking water, gas and non gas beverages and alcohol up to 20% ethanol. Standart Prof COLOR® hoses are made of thermoplastic elastomer, that is a better version of rubber, outstanding elastic and deformation resistant qualities, resistance against UV rays up to 50 years. Standart Prof COLOR ® TPE drinking water hoses have considerably lighter weight comparing to regular rubber hoses and demonstrate no color loss, no kinks and no cracks. Packing method: the hose is winded up in a coil, fixed by a fastening tape and placed in shrink wrap. Product composition:Thermoplastic elastomer (TPE) Color :Yellow, green, blue, red with a white stripe Service life:Up to 20 years Temperature range of use:-50+70°C (-58+158°F) Working pressure:10 bar Product unit:Running meter Application mode:To water garden during any season. Can be connected to a hose sprayer. Can be winded on a hose reel Transportation :Pallets of coils Recycling :Allowed

Flotoreagent oxal T- is used in manufacture of plasticizers for rubber products and film materials Description: Not stratified, yellow to brown color liquid with a weak smell of ammonia Characteristics: flares up from contact with fire, hot objects, does not create fire or explosion when interacting with oxygen and water. Scope of application: manufacture of plasticizers for rubber products and film materials Type of packaging: Jerry cans, steel barrels, intermediate bulk containers, tank trucks

Neonol AF - oxyethylated monoalkylphenol based on propylene trimers is a highly effective nonionic surfactant. Description: Transparent, color free oily texture liquid or with slightly yellow tint. Characteristics: dissolves well in organic solvents, and is dispersed to form emulsions in water Scope of application: oil, textile, pulp and paper, woodworking and ferrous industry Type of packaging: Jerry cans, steel barrels, intermediate bulk containers, tank trucks

Scale inhibitor, which prevents the formation of rust and mineral deposits in pipes, cooling system heat exchanger. It contains nitrilotrimethylphosphonic (NTF) and other phosphonic acids. Suitable for carbon steel and copper-containing alloys.

Description: Oily colorless, odorless liquid with sweetish taste. Characteristics: Soluble in water, C2H5OH, acetone. Insoluble in aromatic bonds free compounds, chloroform and compounds with aromatic system. Scope of application: It is used in the following industries: chemical, textile, aviation, electrical, automotive, oil and gas industry, etc. Type of packaging: Jerry cans, steel barrels, intermediate bulk containers, tank trucks. Mass fraction of ethylene glycol:99,9 Mass fraction of water:less than 0.1% Color in Hazen units in normal state:5

Flint® is a fire intumesment sealing tape aimed to retard spreading of fire through the fireproof doors, valves, closets and safe boxes. Graphite-based black tape and graphite-free colored tape. Flint® have high protective qualities, developed by our own engineering laboratory. As well, all our fire retardant seals complemented with an aestethic appearance - matt smooth surface of any required colour. Adhesive layer 3M can be applied to the tape Packing method: 120 or 60 r.m. coil in a cardboard box. Product composition:Thermoplastic compound Color :Any color by RAL Intumescent beginning temperature of black tape:From 180°C (356°F) Intumescent beginning temperature of color tape:From 200°C (392°F) Expansion ratio of black tape:Over 3000% Expansion ratio of color tape:Over 5000% Fire protection limit:120 minutes Lifetime :25 years Self-adhesive layer:3M Application mode:To apply on fire protection equipment Product unit:Running meter Transportation :Pallets of coils Recycling :Not allowed

Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs. Material:Composite made of solid-woven reinforced fiberglass Diameter:50-1200 mm length:200-600 mm Bolts, nuts:Steel, can be made of carbon fiber Weight:Much lighter than steel ones Operating pressure:Up To 20 MPa (200 Bar) Corrosion resistance:100% Chemical resistance:100% Application temperature:-60 *C to +180 *C (Celsius) Fire resistance:Yes Applicable to pipes made of material:Metal, plastic, stone Major repairs:Yes Service life:Not more than 30 years old Installation time:2-3 hours Repair kit:included

Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs. Material:Composite made of solid-woven reinforced fiberglass Diameter:50-1200 mm length:200-600 mm Bolts, nuts:Steel, can be made of carbon fiber Weight:Much lighter than steel ones Operating pressure:Up To 20 MPa (200 Bar) Corrosion resistance:100% Chemical resistance:100% Application temperature:-60 *C to +180 *C (Celsius) Fire resistance:Yes Applicable to pipes made of material:Metal, plastic, stone Major repairs:Yes Service life:Not more than 30 years old Installation time:2-3 hours Repair kit:included

Magnesium sulfate accelerates the growth of horticultural and ornamental crops, increases productivity and improves the taste of fruits. This primarily applies to tomatoes, potatoes and cucumbers, as this substance stimulates the formation of starch and sugars. Description: Loose powder from white to light gray color. Scope of application: Magnesium sulfate 7-hydrate is used in agriculture as a fertilizer and in the production of synthetic detergents, as a technological raw material in the chemical, metallurgical, pulp and paper, textile industries, in the production of building materials and other industries. Manufacturer: Russia Type of packaging: Packing in bags of 25 kg, Big-Bag bags. Mass fraction :99,2

Description: Thick, flammable liquid with odor Characteristics: soluble in water in any proportions, poorly soluble in ethers and benzole. It causes burns on contact with the skin as it has alkaline properties. Scope of application: It is used as an absorbent for CO2, H2S, SO2 gases; gas production and oil refining industries and in the production of detergents. Type of packaging: Jerry cans, steel barrels, intermediate bulk containers, tank trucks.

Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs. Diameter:50-1200 mm length:200-600 mm Material:Composite made of solid-woven reinforced fiberglass Bolts, nuts:Steel, can be made of carbon fiber Weight:Much lighter than steel ones Operating pressure:Up To 20 MPa (200 Bar) Corrosion resistance:100% Chemical resistance:100% Application temperature:-60 *C to +180 *C (Celsius) Fire resistance:Yes Applicable to pipes made of material:Metal, plastic, stone Major repairs:Yes Service life:Not more than 30 years old Installation time:2-3 hours Repair kit:included

Description: Sulfamic acid is an organic compound of colorless diamond-shaped crystals that dissolves well in water and has poor reaction to organic solvents. Sulfamic acid is quite reactive with phenols, primary and secondary alcohols. Scope of application: as a raw material in the chemical agents synthesis and household cleaning products; in the food industry: for disinfection of tableware and kitchen utensils; in the pulp and paper industry: when cleaning paper-making machines; in the textile industry: for obtaining fire-resistant materials; in the oil industry: oil wells bottom hole treatment; acid is one of the main components in the production of cleaning products and detergents; as a raw material for cleaning water-cooling systems from mucus and impurities, including swimming pools. Type of packaging:bags 40 kg Mass fraction :90 Sulfate ion mass fraction :5

Thermoplastic elastomers for the automotive, cable industry, medical devices, children's toys, seals, hoses. Standart Prof ® Factory develops thermoplastic elastomers with required qualities for automobile, building, agriculture, sport, shoe, medicine, children goods, food, household appliance and packing industries. All our raw thermoplastic elastomers are developed by our own engineering laboratory and pass the strict quality control. Standart Prof ® Factory thermoplastic elastomers draw a great adhesion to plastics РР, РЕ, PS, ABS, PA. Have wide hardness range by Shore scale, easy to recycle, low energy consumption, easy coloring and short cycle time. Packing method: 1 ton in a cardboard box or 25 kg in a plastic bag. Product composition:Thermoplastic elastomer color :Any colour by RAL Hardness range:20 Sh A - 55 Sh D Density :From 0,88 to 1,33 g/ml Flow rate :Vary in order on request Product unit:Kg, ton Transportation :PP bags by 25 kg, big-bag by 1000 kg, carton boxes by 500 kg Recycling :Allowed